A UPS is built to bridge the gap: long enough to save your work and shut down, or to keep the network up until a generator starts. Its runtime depends far more on the battery inside than on the VA figure on the box. A router mini UPS is different: the load is so small that a pocket sized lithium pack keeps the wifi up for hours.
How to use it
- Choose a computer UPS or a router mini UPS.
- For a computer UPS, enter the VA and the watt rating from the label (the watt rating is often about 60% of the VA). Most small units have one 12 V 7 Ah or 9 Ah battery; 1,000 to 2,000 VA units often have two or four.
- Enter what is plugged in. A gaming PC or a laser printer uses far more than an office PC; a laser printer should not go on a small UPS at all.
- For a mini UPS, enter the mAh on the label and the watts of the router and fibre box together.
How the sum works
For a computer UPS, the battery current is the load divided by the battery voltage and the UPS efficiency (about 85%). The small sealed batteries inside lose a lot of capacity when they are drained in minutes, so the calculator applies the Peukert effect, which is why doubling the load more than halves the runtime. If the load is more than the watt rating, the UPS shuts off as soon as the power fails.
For a mini UPS, the mAh figure is at the lithium cell's 3.7 V, so watt hours = mAh × 3.7 ÷ 1,000. About 15% is lost boosting it to 9 or 12 V for the router.
Worked examples
- A 650 VA (360 W) UPS with one 12 V 7 Ah battery running a 120 W office PC: about 16 minutes. At 240 W, only about 7 minutes.
- A 2,000 VA UPS with two 12 V 9 Ah batteries running a 300 W server and switch: about 16 minutes.
- A 10,400 mAh mini UPS running a router and fibre box that use 15 W together: about 2 hours 10 minutes. For a full 8 hour night it would need a pack of about 38,000 mAh, or a small inverter or power station.